Enabling and Disabling Ultra Power Saving Mode in Samsung Galaxy S6 Edge

Enabling and Disabling Ultra Power Saving Mode in Samsung Galaxy S6 Edge

Ultra power saving mode is an enhanced power saving mode that can be used to extend your battery power so you can use your phone longer, even when the battery level is low. When ultra power saving mode is enabled, your phone will save battery power by changing the color of the screen to grayscale, applying a simplified home screen, restricting app usage to only essential and selected apps, turning off mobile data when the screen is off, turning off connectivity features, etc.

How to enable ultra power saving mode?
You can turn on this feature by using the following steps:

1. Swipe down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
2. Scroll down to the System section and then tap Battery.
   
3. Tap Ultra power saving mode.
   
4. Slide the ON/OFF switch to the right to enable ultra power saving mode.
   
5. Ultra power saving mode will be enabled.

How to use ultra power saving mode?
When you're in ultra power saving mode, you can do the following actions:

1. Add apps to the home screen.
   By default, you're provided with three essential apps in the home screen(they're likely: Internet app, Messages app and Phone app). But, when needed you can add up to 3 apps to the home screen by using these steps:
• Tap .
• Select the required app.
• The selected app will be added to the home screen.
2. Remove apps that have been added by you from the home screen.
   When needed, you can remove unused or unwanted apps from the home screen by using these steps:
• Tap More at the top right and then select Remove.
• Tap at the required apps you want to remove.
• Tap OK button.
• The selected apps will be removed from the home screen
3. Using apps.
   You can use apps in the home screen, either default apps or those selected by you. But, some options or features in those apps may not available in order to extend the battery power.
4. Adjust the settings.
   When needed, you can adjust the settings of your phone by using these steps:
• Tap More at the top right and then select Settings.
• Here you can adjust the required settings, e.g., turn on or off Wi-Fi, turn on or off Bluetooth, turn on or off airplane mode, turn on or off mobile networks, turn on or off location, adjust the device's volume and vibration, and adjust the screen brightness.
5. View the battery power information.
   The information of your battery percentage and estimated usage time remaining will be displayed at the bottom of the home screen. This will show you how many days or hours your battery will run out when your phone is in standby mode.

How to disable ultra power saving mode?
You can turn off this feature by using the following steps:

1. Tap More at the top right and then select Turn off ultra power saving mode.
   
2. Ultra power saving mode will be disabled.

Samsung Galaxy S6 Edge: How to Configure Power Saving Mode in Android 5.1.1 Lollipop

Samsung Galaxy S6 Edge comes with some features that you can use to conserve more battery power, one of which is the power saving mode. You can manually activate this feature whenever you want or set your phone to automatically activate this feature when the remaining battery power reaches certain level. When the power saving mode is activated, it'll limit or disable some of your phone's functions, e.g: limit the maximum CPU performance, reduce the screen brightness, turn off vibration feedback, turn off the touch key light, and reduce the time before the screen is turned off after receiving notifications so your phone will go into sleep mode faster.


How to configure power saving mode?
You can do so by using the following steps:

1. While the screen is unlocked, swipe down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
2. Scroll down to the System section and then tap Battery.
   
3. Tap Power saving mode.
   
4. Slide the ON/OFF switch to the right to enable the power saving mode. The switch turns green when it's enabled.
   
5. If needed, you can set when your phone has to activate power saving mode by tapping Start power saving and then select Immediately(this option is enabled by default), At 5% battery power, At 15% battery power, At 20% battery power, or At 50% battery power. As the example, if you select At 15% battery power, your phone will automatically activate power saving mode when the remaining battery power reaches 15%.
   

Samsung Galaxy S6 Edge: How to Adjust the Screen Time Out in Android 5.1.1 Lollipop

Samsung Galaxy S6 Edge comes with some features that can be used to save more battery, one of which is the screen timeout feature. You can use this feature to adjust the length of the idle time that should be waited by your phone before turning off the screen backlight. As the example, if you set the screen timeout to 30 seconds, means your phone will automatically turn off the screen backlight after 30 seconds of inactivity.


How to adjust the screen timeout?
You can do so by using the following steps:

1. While the screen is unlocked, swipe down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
2. Scroll down the screen to the Device section and then tap Display.
3. Tap Screen timeout and then select from the following options:
• 15 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
4. The screen timeout has been adjusted. FYI, if you concern with your battery life, you can set the screen timeout to a shorter period because it'll save more power as your phone doesn't have to keep the screen backlight on for a longer period.

Samsung Galaxy S5: How to Keep Wi-Fi Stays On During Sleep in Android 4.4.2 Kitkat

For some reason, you may need to keep connecting your phone to Wi-Fi network so that you can stay connected to the internet without having to be interrupted or disconnected each time the phone goes to sleep. If that so, you need to set the Wi-Fi sleep option to always connect to Wi-Fi network even when the screen is off.


How to keep Wi-Fi remains on during sleep?
You can do so by using the following steps:

1. On any screen, swipe down the top of the screen to open up the notification panel and then tap to go to the settings menu.
2. With the settings menu is displayed in grid view, scroll down to the Network connections section and then tap Wi-Fi .
3. If the Wi-Fi is off, tap the ON/OFF switch to turn it on.
4. Tap or long press the Recent apps key to open up the additional option and then select Advanced.
5. Tap Keep Wi-Fi on during sleep and then select Always.
6. Now, unless you turn off the Wi-Fi connection manually, your phone will continue connecting to Wi-Fi network even when the screen is off.

As a note, install a third-party power saver app or battery saver app can disconnect the Wi-Fi connection automatically even when you have set your phone to always keep Wi-Fi on during sleep. Thus, uninstall the app should be able to fix this issue.